1.29 problem, can't read/write etc

OpenECU software executables and source code

Moderator: Freon

1.29 problem, can't read/write etc

Postby imprezarsx » Sat Nov 11, 2006 12:00 pm

I installed the 1.29a EcuFlash and can't get the read/write/compare options to work.
I can't click on the buttons or anything.
No com port options anywhere.

Am I just missing something?

Thanks,
Dominic
imprezarsx
 
Posts: 40
Joined: Mon Jul 24, 2006 4:15 pm

Re: 1.29 problem, can't read/write etc

Postby awdmig » Sat Nov 25, 2006 2:45 pm

imprezarsx wrote:I installed the 1.29a EcuFlash and can't get the read/write/compare options to work.
I can't click on the buttons or anything.
No com port options anywhere.

Am I just missing something?

Thanks,
Dominic


Same problem No vehicle interface :?
awdmig
 
Posts: 2
Joined: Sun Nov 19, 2006 4:46 pm
Location: Toronto, Canada

Postby imprezarsx » Sat Nov 25, 2006 3:43 pm

seems to be a lot of problems with 1.29. I would recommend going back to 1.28. Already seen a lot of com problems and fried ecu's.
imprezarsx
 
Posts: 40
Joined: Mon Jul 24, 2006 4:15 pm

Postby cdvma » Fri Dec 01, 2006 12:55 pm

Yep same problem here, no vehicle interface.
cdvma
 
Posts: 86
Joined: Tue Jan 04, 2005 9:18 pm
Location: Roch. Inst. of Tech.

Postby cdvma » Fri Dec 01, 2006 12:59 pm

So anyone have a download of 1.28? I'm dead in the water now because it was removed from the server.
cdvma
 
Posts: 86
Joined: Tue Jan 04, 2005 9:18 pm
Location: Roch. Inst. of Tech.

Postby imprezarsx » Fri Dec 01, 2006 1:29 pm

i do. I put it up on the osecurom forum.
Look in the legacy GT section
http://www.plasmatize.com/osecuroms/download.php?id=396

I think you have to be registered on the osecuroms.org website to download.
imprezarsx
 
Posts: 40
Joined: Mon Jul 24, 2006 4:15 pm

Postby cdvma » Sat Dec 02, 2006 2:16 pm

Thanks. I do have a login there so that was a snap.
cdvma
 
Posts: 86
Joined: Tue Jan 04, 2005 9:18 pm
Location: Roch. Inst. of Tech.

Postby disque71 » Sun Dec 03, 2006 9:44 am

uninstall all drivers and software

i had this same issue when i went to 1.29

you have to uninstall your old tactrix drivers
restart
install 1.29
plug in tactrix cable
it will install like 2 drivers, if need be point to 1.29 directory
flash

from my old post

uninstall everything, old software and drivers
restart
reinstall 1.29
plug in cable
when prompted, point windows towards drivers folder(i think this happens twice[2drivers])
pray
flash


i did this and it worked for me

i think what happens is you have <1.28 cable drivers with 1.29

http://forums.openecu.org/viewtopic.php?t=1296&highlight=
disque71
 
Posts: 16
Joined: Sat May 06, 2006 1:31 pm


Return to OpenECU Software

Who is online

Users browsing this forum: Bing [Bot] and 4 guests