EcuFlash 1.29 problem: Flashing tools do not recognize...

OpenECU software executables and source code

Moderator: Freon

EcuFlash 1.29 problem: Flashing tools do not recognize...

Postby menfou » Tue Oct 31, 2006 12:53 pm

Hello,

Today I tried to write my new ROM in a Subaru STI EU 2002 and I had this problem(see attachment)

Flashing tools do not recognize flash method ''
I found something on the forum but I don't have a solution

I can read the ROM with 1.29, modify the ROM but I can't write my rom in the ECU.
Attachments
stockSTI.hex
(160 KiB) Downloaded 748 times
ecuflash.gif
ecuflash.gif (34.41 KiB) Viewed 3179 times
menfou
 
Posts: 8
Joined: Fri Jun 09, 2006 4:29 am

Postby merchgod » Tue Oct 31, 2006 1:07 pm

This is because no flashmethod is defined for this rom. Go to directory Ecuflash/rommetadata/Subaru/wrx. Look for A4RN1000.xml. Open it with a text editor. Under <flashmethod>, enter the appropriate flashmethod for your car. I'm assuming it should be wrx02 - <flashmethod>wrx02</flashmethod>

You might want to check in the EDM sub-forum to make sure wrx02 is the correct flashmethod that others with the same rom have had success with.
merchgod
 
Posts: 243
Joined: Fri Sep 29, 2006 10:17 am

Postby menfou » Tue Oct 31, 2006 11:17 pm

Ok, I understood.
menfou
 
Posts: 8
Joined: Fri Jun 09, 2006 4:29 am


Return to OpenECU Software

Who is online

Users browsing this forum: No registered users and 9 guests