openecu.org

Trying to read European Sti 04 Flash
and get error:
[10:12:15.109] Version 1.28.716
[10:12:15.109] 8 memory models read.
[10:12:15.328] 71 ROM metadata models read.
[10:12:15.328] checksum module "subarudbw" loaded.
[10:12:15.328] flashing tool "wrx02" loaded.
[10:12:15.328] flashing tool "wrx04" loaded.
[10:12:15.328] flashing tool "sti04" loaded.
[10:12:15.328] flashing tool "sti05" loaded.
[10:12:15.328] flashing tool "mitsukernel" loaded.
[10:12:15.328] flashing tool "mitsukernelocp" loaded.
[10:12:15.328] flashing tool "mitsubootloader" loaded.
[10:12:24.671] ssm2_init
[10:12:24.843] ECU ID is 2E 44 59 61 05
[10:12:24.843] ssm2_cmd_0x81
[10:17:42.656] ssm2_init
[10:17:42.828] ECU ID is 2E 44 59 61 05
[10:17:42.828] ssm2_cmd_0x81

May be someone can help with this?
And Sometimes get an error:

[10:37:55.343] ssm2_init
[10:37:55.656] ssm2_init
[10:37:55.968] ssm2_init
[10:37:56.281] ssm2_init
[10:37:56.593] ssm2_init
[10:37:56.906] ssm2_init
[10:37:57.218] ssm2_init
[10:37:57.531] ssm2_init
[10:37:57.843] ssm2_init
[10:37:58.156] ssm2_init
[10:37:58.656] kernel get version
[10:37:59.296] validating denso kernel ram area addr: 020000 len: 0008
[10:38:57.562] ssm2_init
[10:38:57.875] ssm2_init
[10:38:58.187] ssm2_init
[10:38:58.500] ssm2_init
[10:38:58.812] ssm2_init
[10:38:59.140] ssm2_init
[10:38:59.453] ssm2_init
[10:38:59.765] ssm2_init
[10:39:00.109] ssm2_init
[10:39:00.421] ssm2_init
[10:39:00.921] kernel get version
[10:39:01.562] validating denso kernel ram area addr: 020000 len: 0008

Is the ignition in the on position, without the car running? Which vehicle did you select from the menus? Do you have the test mod connector plugged in?

same error

2005 WRX from ARUBA

[02:30:29.193] Version 1.29.906
[02:30:29.193] 8 memory models read.
[02:30:31.456] 140 ROM metadata models read.
[02:30:31.456] checksum module "subarudbw" loaded.
[02:30:31.456] flashing tool "wrx02" loaded.
[02:30:31.456] flashing tool "wrx04" loaded.
[02:30:31.456] flashing tool "sti04" loaded.
[02:30:31.456] flashing tool "sti05" loaded.
[02:30:31.456] flashing tool "mitsukernel" loaded.
[02:30:31.456] flashing tool "mitsukernelocp" loaded.
[02:30:31.456] flashing tool "mitsubootloader" loaded.
[02:30:45.857] denso02_bootloader_cmd_start
[02:30:47.058] denso02_bootloader_cmd_start
[02:30:48.260] denso02_bootloader_cmd_start
[02:30:49.462] denso02_bootloader_cmd_start
[02:30:50.664] denso02_bootloader_cmd_start
[02:30:51.084] kernel get version
[02:31:09.591] ssm2_init
[02:31:09.761] ECU ID is 3D FFFFFFA4 58 30 05
[02:31:09.761] ssm2_cmd_0x81
[02:42:43.899] Version 1.29.906
[02:42:43.909] 8 memory models read.
[02:42:46.162] 140 ROM metadata models read.
[02:42:46.162] checksum module "subarudbw" loaded.
[02:42:46.162] flashing tool "wrx02" loaded.
[02:42:46.162] flashing tool "wrx04" loaded.
[02:42:46.162] flashing tool "sti04" loaded.
[02:42:46.162] flashing tool "sti05" loaded.
[02:42:46.162] flashing tool "mitsukernel" loaded.
[02:42:46.162] flashing tool "mitsukernelocp" loaded.
[02:42:46.162] flashing tool "mitsubootloader" loaded.
[02:43:20.382] ssm2_init
[02:43:20.552] ECU ID is 3D FFFFFFA4 58 30 05
[02:43:20.552] ssm2_cmd_0x81
[02:43:37.026] denso02_bootloader_cmd_start
[02:43:38.227] denso02_bootloader_cmd_start
[02:43:39.429] denso02_bootloader_cmd_start
[02:43:40.631] denso02_bootloader_cmd_start
[02:43:41.833] denso02_bootloader_cmd_start
[02:43:42.273] kernel get version
[02:43:53.579] denso02_bootloader_cmd_start
[02:43:54.781] denso02_bootloader_cmd_start
[02:43:55.983] denso02_bootloader_cmd_start
[02:43:57.185] denso02_bootloader_cmd_start
[02:43:58.386] denso02_bootloader_cmd_start
[02:43:58.807] kernel get version
[02:44:12.797] ssm2_init
[02:44:12.957] ECU ID is 3D FFFFFFA4 58 30 05
[02:44:12.967] ssm2_cmd_0x81
[02:44:27.759] ssm2_init
[02:44:27.919] ECU ID is 3D FFFFFFA4 58 30 05
[02:44:27.929] ssm2_cmd_0x81
[02:44:39.776] ssm2_init
[02:44:39.936] ECU ID is 3D FFFFFFA4 58 30 05
[02:44:39.946] ssm2_cmd_0x81
[02:44:54.527] ssm2_init
[02:44:54.687] ECU ID is 3D FFFFFFA4 58 30 05
[02:44:54.697] ssm2_cmd_0x81

same error log as peps_sti

car: sti 04 EDM

find somebody a solution for this problem ?

wrong obd cable ?

try selecting the wrx 2001-2003 profile (wrx02) in ecuflash when asked to.

kascade1 wrote:try selecting the wrx 2001-2003 profile (wrx02) in ecuflash when asked to.

I double this

EUDM STi 2002 to 2005 remained on wrx03 flashmethod

i try every flashmethod no one works

i can log the realtime data from the ecu but write oder read the ecu dont work ...

please post the link to the correkt obd cable ...