Subaru Bench Flashing Setup?

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Subaru Bench Flashing Setup?

Postby sureshot007 » Mon May 18, 2015 6:58 am

I'm trying to bench flash a 2002 WRX ecu, but I need some confirmation on how to hook up the wires. I have the ecu pigtails, and a blank OBD2 connector.

My guess is for the ECU harness:
https://www.xcceleration.com/pinouts/20 ... inouts.pdf
Power - D2, D3
Ground - C17, A22
SSM - A21 (goes to OBD2 connector pin 10)

Then wire the OBD2 connector:
http://legacygt.com/forums/attachment.p ... 1099973620
Pin 10 -> A21 from ECU
Pin 12,13 -> Ground
Pin 1 -> Power

Am I on the right track?
sureshot007
 
Posts: 14
Joined: Thu Aug 23, 2007 6:49 pm

Return to Interface Hardware

Who is online

Users browsing this forum: Google [Bot] and 2 guests

cron