can not load 1.3u drivers.
Posted: Thu Apr 09, 2015 6:10 am
I have tried 4 PC, each gets the exact same error. Don't matter was version of ECUFlash I try with I can not load up the Com ports for my 1.3u cable.
Each time the following error message displays:
An error occurred during the installation of the device: The driver installation file for this device is missing a necessary entry. This may be because the INF was written for Windows 95 or later. Contact your hardware vendor.
I tried all my known methods of getting the windows 8.1 device manager to load up the correct drivers by manual install but all fail with error 28 or error 1. I tired the drivers in the ecuflash folder as well as the raw ā€ˇVirtual COM Port Drivers of the ftdichip.
Please let me know if you need any more information.
Thanks for the help.
Each time the following error message displays:
An error occurred during the installation of the device: The driver installation file for this device is missing a necessary entry. This may be because the INF was written for Windows 95 or later. Contact your hardware vendor.
I tried all my known methods of getting the windows 8.1 device manager to load up the correct drivers by manual install but all fail with error 28 or error 1. I tired the drivers in the ecuflash folder as well as the raw ā€ˇVirtual COM Port Drivers of the ftdichip.
Please let me know if you need any more information.
Thanks for the help.