Page 1 of 1

MMCFlash USB Module

PostPosted: Thu Sep 08, 2011 5:47 am
by ExtremEcu
Hello !

Did anyone buy one from the MMCFlash USB Module what is on the Evoscan webpage ? How does it working ?

Re: MMCFlash USB Module

PostPosted: Mon Oct 17, 2011 9:41 am
by DeeGraf
Yes, i bought one.

In my case this one who can read MH7201F Cpu's and OP2.0
You need OP2.0 because of better compatibility, OP1.3U (had before) is only able to read but not to wrtie.
Then you're able to read and write Ecu without any problems

Regards

Re: MMCFlash USB Module

PostPosted: Sat Dec 03, 2011 3:42 am
by Bruce Willis
At you interface Open port 1.3, on it you can't write flash. If to use OP 2.0 those all 100 % write.
If don't work we will return money

Re: MMCFlash USB Module

PostPosted: Tue Dec 13, 2011 5:35 am
by ayashiko
Hi, I bought all the modules in MMC FLASH OP 2 works perfectly able to read and write

Re: MMCFlash USB Module

PostPosted: Fri Dec 16, 2011 10:49 pm
by Greg555
I bought the stick but don't know how to edit diff maps nor was given any maps with the purchase

Re: MMCFlash USB Module

PostPosted: Sat Dec 17, 2011 6:27 am
by Bruce Willis
The product is positioned as the loader, capable to read and flash. Abilities on editing of maps it has not been declared.

Re: MMCFlash USB Module

PostPosted: Sat Dec 17, 2011 7:30 am
by Greg555
so what are we suppose to do at this point???

I know people have xml for X but does not seem to be avalable for us

Greg

Re: MMCFlash USB Module

PostPosted: Sat Dec 17, 2011 10:24 am
by Bruce Willis
We do not supposes, we offer what we offer. It reads and writes ECU

Re: MMCFlash USB Module

PostPosted: Sat Dec 17, 2011 4:26 pm
by Greg555
Bruce Willis wrote:We do not supposes, we offer what we offer. It reads and writes ECU



Sorry, MR Willis but you are very misleading and you do not take care of of your customers.

I purchased his MMC and discovered that xml's to edit ACD diff maps are not available

I sent him PM asking very nicely for assistance he replied "Show me where you read that the boot loader go bargain description of calibration or that we must to provide them to you?"

I just spent close to $600US on his MMC and unless someone comes up with a way to edit maps and shares that with us it is useless.

Yes it can read and write from ACD but we can't edit the maps so whats a point??? It's like someone sells you a Car but fuel is not available:)

He can edit them but wont help you.



This is MMC description from EVOSCAN:

Latest Version MMCFlash Software to reprogram ecu. ---- key word "reprogram"

Download ECUFlash to edit maps. ---- key word "edit"

Use Free Community EcuFlash rom tables metadata XMLs ---- not available

Sorry but this is not right.

Greg

Re: MMCFlash USB Module

PostPosted: Sat Dec 17, 2011 6:11 pm
by Bruce Willis
Sorry, MR Greg555,but you c an not read or do not want to understand.You are not asked for help, you are required it, this is the difference. Education does not allow me to put personal correspondence without your agreement. What you have quoted from the site Evoscan means the following:
Like a Hex visualizer you can use Ecuflash, nothing more. For example, in the same Ecuflash you are not guaranteed to have a complete or at least a partial description of the maps for your machine.

One example that you brought just similar to ours. The car you buy from a dealer and gasoline at a gas station, and pay for it separately.
Disassembling a specific maps has a lot of time and it costs more than a lot of money and we do not do that, if we will, it will be a standalone product for some money.

Re: MMCFlash USB Module

PostPosted: Tue Dec 27, 2011 5:01 am
by Bruce Willis
Marcello wrote:how to buy mmcflash the site is only in russian or is there a english one ?

i need to speak with the maker of programm

You can buy on the evoscan.com
And you can ask mr here about MMCFLASH

Re: MMCFlash USB Module

PostPosted: Sun Jan 01, 2012 5:19 pm
by salt36
MMCFlash is the only one to read/write to my AUDM 2009 Triton with 32176F4 chip.......

Currently getting the definitions for it, then I can tune :D

Re: MMCFlash USB Module

PostPosted: Sun Jan 01, 2012 6:51 pm
by Bruce Willis
salt36 wrote:MMCFlash is the only one to read/write to my AUDM 2009 Triton with 32176F4 chip.......

Currently getting the definitions for it, then I can tune :D

Can you post here or PM bin from it?

Re: MMCFlash USB Module

PostPosted: Sun Jan 01, 2012 10:21 pm
by salt36
Here you go 8)

2009 AUDM Triton stock binary.bin
(512 KiB) Downloaded 1347 times

Re: MMCFlash USB Module

PostPosted: Fri Feb 10, 2012 10:26 am
by hackish
We never got a triton in North America but that rom is a pretty standard 6G79 tune off either a manual gearbox or a PCM with an external TCM.

-Michael