I have the openport 2.0 for my 08 wrx. Installed romraider and ecuflash and all the recent definitions and everything.
I plug the op 2.0 into the car while its off and into the computer, then click read from ecu and the list to select my car from comes up blank. Ive also tried to hook it up with the car in the on position and still get the same problem. Hook the op in when cars off, turn the key to on and cliuck read from ecu, and still the list comes up blank.
No matter what I try, it comes up blank. Ecuflash says Openport 2.0 on COM 4 in the lower right corner but it like doesnt recognize my car. Someone please help me! Ive tried unistalling ecuflash and the drivers for the OP and reinstalling and still no fix.
This is the log from when i try to read ecu and i attached a screenshot of when i try to read ecu too.
[18:56:25.317] EcuFlash Version 1.42.2595
[18:56:25.317] OS Version Windows Vista
[18:56:25.317] Qt Version 4.5.0
[18:56:25.328] 56 memory models read.
[18:56:25.329] scanning for metadata models in C:/Users/Colby/Downloads/ECUFLASH STANDARD units SUBARU ECU definitions 0.8.3.1b 10-07-09 (1)/subaru
[18:56:36.761] 333 ROM metadata models scanned.
[18:56:36.761] checksum module "subarudbw" loaded.
[18:56:36.761] checksum module "mitsucan" loaded.
[18:56:36.762] flashing tool "wrx02" loaded.
[18:56:36.762] flashing tool "wrx04" loaded.
[18:56:36.762] flashing tool "sti04" loaded.
[18:56:36.763] flashing tool "sti05" loaded.
[18:56:36.763] flashing tool "mitsukernel" loaded.
[18:56:36.763] flashing tool "mitsukernelocp" loaded.
[18:56:36.763] flashing tool "mitsubootloader" loaded.
[18:56:36.763] flashing tool "shbootmode" loaded.
[18:56:36.766] flashing tool "shaudmode" loaded.
[18:56:36.766] flashing tool "subarucan" loaded.
[18:56:36.767] flashing tool "mitsucan" loaded.