Do I need a jumper/connector? JDM WRX into a old 2.5RS

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Do I need a jumper/connector? JDM WRX into a old 2.5RS

Postby mad doc » Tue May 02, 2006 6:37 pm

I'm not sure if I need this:
Image

And if i do, how do I connect it to the wires?
mad doc
 
Posts: 7
Joined: Mon May 01, 2006 8:38 pm

Postby tverdek » Mon Dec 18, 2006 10:47 am

you need to look at both wiring diagrams of the stock and transplant engine, then make sure that you mimic what happens when you put the car into diagnsotic mode on the transplant engine

for me with my 00rs w/02usdm 2.0l i simply needed to plug in the green conncetor because it has two connectors, one "jumpered" the flash connector essentially, and the other is involved with a ground i think

HOWever, i did need to add one wire from the ecu to position 8 on my data link connector that was not present on my 00rs

hope that helps
tverdek
 
Posts: 7
Joined: Thu Dec 14, 2006 10:38 am


Return to Interface Hardware

Who is online

Users browsing this forum: Bing [Bot] and 9 guests