Subaru STI 2 - ECU connection

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Subaru STI 2 - ECU connection

Postby pizzaman » Thu Sep 30, 2010 11:46 am

Hi. I would like to connect a Subaru STI ECU out of the car. I have hooked up using this pattern:

E2, E3, E10, A14 to 12v
E15, B17 to gnd.

A5 to gnd is the green test connector
A20 to OBD pen 9 is the L-Line
A21 to OBD pen 7 is the K-line
A10 to OBD pen 11 is the flash voltage.

Connector A=B134, B=B136, E=B137

And this is what I obtain in ecuflash:

[18:02:43.149] Device Firmware Version: 1.07.2597
[18:02:44.287] kernel get version
[18:02:44.646] SSM2 init
[18:02:44.808] SSM2 ECU ID is 2E 44 59 61 05

Anyone can help me to get this ecu work out of the car?
I have some dubts on A20 and A8 connections, which are che pin that I have to bridge on the car.
Thanks to all.
pizzaman
 
Posts: 2
Joined: Thu Sep 30, 2010 11:26 am

Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 3 guests

cron