Can't read any Subaru OP2

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Can't read any Subaru OP2

Postby djphoenixx » Sun May 02, 2010 3:42 am

Hi,
I can't belive it. I Can't read any Subaru with my OpenPort 2.0 Rev E. What is my Problem?
I use the new OpenPort 2.0 drivers for Stand Alone Datalogging. Logging is fine. But no reading
with EcuFlash. For Example the log window after 2007 Subaru Legacy:
[13:41:03.836] EcuFlash Version 1.43.3000
[13:41:03.836] OS Version Windows Vista
[13:41:03.836] Qt Version 4.6.2
[13:41:03.851] 59 memory models read.
[13:41:03.851] scanning for metadata models in G:/EcuFlash/rommetadata
[13:41:04.070] 350 ROM metadata models scanned.
[13:41:04.070] checksum module "subarudbw" loaded.
[13:41:04.070] checksum module "mitsucan" loaded.
[13:41:04.070] checksum module "mitsuh8" loaded.
[13:41:04.070] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[13:41:04.070] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[13:41:04.070] flashing tool "wrx02" loaded.
[13:41:04.070] flashing tool "wrx04" loaded.
[13:41:04.070] flashing tool "sti04" loaded.
[13:41:04.070] flashing tool "sti05" loaded.
[13:41:04.070] flashing tool "mitsukernel" loaded.
[13:41:04.070] flashing tool "mitsukernelocp" loaded.
[13:41:04.070] flashing tool "mitsubootloader" loaded.
[13:41:04.070] flashing tool "shbootmode" loaded.
[13:41:04.070] flashing tool "shaudmode" loaded.
[13:41:04.070] flashing tool "subarucan" loaded.
[13:41:04.070] flashing tool "mitsucan" loaded.
[13:41:10.559] J2534 API Version: 04.04
[13:41:10.559] J2534 DLL Version: 1.00.3017 (DEBUG) Apr 8 2010 14:16:53
[13:41:10.559] Device Firmware Version: 1.10.3007
[13:41:12.202] kernel get version
[13:41:12.248] J2534 error [ERR_TIMEOUT].
[13:41:12.264] SSM2 init
[13:41:12.311] J2534 error [ERR_TIMEOUT].
[13:41:12.326] interface close
[13:41:12.342] interface close

Greets
Marcel
djphoenixx
 
Posts: 5
Joined: Sun Apr 18, 2010 5:15 am
Location: Germany

Re: Can't read any Subaru OP2

Postby djphoenixx » Sun May 02, 2010 3:44 am

Hi,
is there a way to downgrade (flash) the OP Firmware?

Greets
Marcel
djphoenixx
 
Posts: 5
Joined: Sun Apr 18, 2010 5:15 am
Location: Germany

Re: Can't read any Subaru OP2

Postby djphoenixx » Tue May 11, 2010 11:36 am

Hi,
after new install of the ecuflash 1.42.2595 and all drivers it's all fine. But before new install I've deinstalled all Tactrix, FDTI Drivers and the ecuflash beta.
I can read and flash the scoobys.

Greets
Marcel
djphoenixx
 
Posts: 5
Joined: Sun Apr 18, 2010 5:15 am
Location: Germany


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 8 guests

cron