Page 1 of 1

OpenPort 1.3M (for Mitsubishis) pre-ordering now

PostPosted: Mon Apr 24, 2006 5:00 pm
by cboles
I apologize for how long this is taken, but I am taking pre-orders on http://tactrix.com now for the new OpenPort 1.3M which will be shipping out next week. This cable will allow you to reflash the Evo 7/8, 2001-2003 Eclipses, 2002-2004 Lancers, and a number of other Mitsubishis in the near future. The same cable can also reflash any of the DBW Subarus (STi/FXT/LGT/2006WRX), but not the 2002-2005 WRX.

Colby

The Mitsubishi connector wire will be slightly different than what is shown here - it will include a quick-disconnect in line so that you wont have a dangling Mitsu connector on the cable when you don't need to be reflashing Mitsus.

Image

PostPosted: Thu May 04, 2006 12:37 pm
by S54fan
Superb. I've put an order in. I will attempt to use ECUflash 1.24 to suck off my UK Evo IX ROM image when I get the cable.

PostPosted: Tue Jul 11, 2006 6:40 pm
by tuning g
can't find 1.3m cable on tactrix website why need to order one it was there for $89 but now it's gone any reasons why.

thanks for the reply

PostPosted: Wed Jul 12, 2006 6:09 am
by JRSCCivic98
1.3 is for the EVO cars.

PostPosted: Wed Jul 12, 2006 6:41 am
by evo400
tuning g wrote:can't find 1.3m cable on tactrix website why need to order one it was there for $89 but now it's gone any reasons why.

thanks for the reply


Agree ............ why ? i want it :cry:

Edit , now again available :D

PostPosted: Wed Sep 13, 2006 8:27 am
by nvr2fast
Okay I dont want to sound like a bonehead but how do I pay via Paypal? Where do I do it? Who is selling this cable?

Anyone know? And is there any group buy going for this?

PostPosted: Wed Oct 04, 2006 5:17 pm
by HOK
Hi,

I am preparing for the EVO 6 reflashing code to be ready. Should I wait for that to come out to make sure that the cable is usable or is it a certainty that this cable will work with the EVO 6.

Thanks

Re: OpenPort 1.3M (for Mitsubishis) pre-ordering now

PostPosted: Sun Mar 25, 2007 7:54 pm
by Claudio_Haltech
cboles wrote:The same cable can also reflash any of the DBW Subarus (STi/FXT/LGT/2006WRX), but not the 2002-2005 WRX.

Colby

Hi, ive just ordered your 1.3 cable, and wanted to know about the 2002-05 WRX, i cant do anything with this cable and those cars? and what about the non-DBW WRX from 97 through 01? provided there are ECU definitions.

openport 1.3m

PostPosted: Wed Apr 18, 2007 11:35 am
by cskok2003
my car is 2003 subaru sti,can this cable use by ecuflash?

Re: OpenPort 1.3M (for Mitsubishis) pre-ordering now

PostPosted: Wed Apr 18, 2007 3:35 pm
by cboles
The Mitsubishi specific cable can't relfash non-DBW Subarus as it lacks a need reflash voltage. The Universal cable was made for this reason. It does have that additional voltage.

Colby

Claudio_Haltech wrote:
cboles wrote:The same cable can also reflash any of the DBW Subarus (STi/FXT/LGT/2006WRX), but not the 2002-2005 WRX.

Colby

Hi, ive just ordered your 1.3 cable, and wanted to know about the 2002-05 WRX, i cant do anything with this cable and those cars? and what about the non-DBW WRX from 97 through 01? provided there are ECU definitions.

Re: openport 1.3m

PostPosted: Wed Apr 18, 2007 3:35 pm
by cboles
Not with the Mitsubishi cable, but it can be done with the Universal cable.

Colby

cskok2003 wrote:my car is 2003 subaru sti,can this cable use by ecuflash?

PostPosted: Sun May 13, 2007 2:01 pm
by Dave Harries
I know this will be a silly question, but when installing the universal cable how will the drivers be labled? as I've recently purchased a cable that was said to be a universal one but when I plugged it in the isntall gave no mention of subaru drivers and comes up 1.3M when being used with ecuflash, is this ok for non drive by wire subarus for reading and flashing?
Hope you understand that Dave

Able to reflash New L200?

PostPosted: Thu Nov 22, 2007 6:44 am
by beerthai
Able to reflash New L200?