Hello,
May be someone can help.
with my old vagcom I can log the data using RomRaider logger and Ecuexplorer, Learning view also work. I cannot read the rom (normal)
with Openport 2.0E I can reed the rom, but NOT able to log with RomRaider logger and Ecuexplorer, Learning view also DO NOT work????
I also got his message: "ecu id of faeb802bc1 not found"
All old drivers was removed, installed ecuflash_1422595_win.exe, so far only EcuFlash work.
LearningView_LOG.txt
[21:55:56.2342480] PassThruOpen returned 0 and DeviceID 5
[21:55:56.2342480] PassThruReadVersion returned 0
[21:55:56.2342480] Device firmware version: 1.10.2658
[21:55:56.2342480] DLL version: 0.50.2598 Jun 26 2009 15:02:29
[21:55:56.2342480] API version: 04.04
[21:55:56.2342480] PassThruConnect returned 0 and ChannelID 7
[21:55:56.2442624] PassThruStartMsgFilter returned 0
[21:55:56.2442624] ECU Init
[21:55:56.2743056] PassThruWriteMsgs returned 0
[21:55:56.2743056] WRITE 6 bytes: 80 10 F0 01 BF 40
[21:55:56.3444064] PassThruReadMsgs returned 0
[21:55:56.3544208] READ 0 bytes
[21:55:56.4445504] PassThruReadMsgs returned 0
[21:55:56.4445504] READ 62 bytes: 80 F0 10 39 FF A2 10 0F 1B 44 58 05 05 73 FA EB 80 2B C1 02 AA 00 10 00 60 CE 54 F8 B0 60 00 00 E0 00 00 00 00 00 DC 00 00 55 10 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 67
[21:55:57.6162352] ECU ID of FAEB802BC1 not found in definitions
[21:55:57.6262496] PassThruDisconnect returned 0
[21:55:57.6362640] PassThruClose returned 0
ecuexplorer log.txt
21:54:28.047 - list column added - Historic Trouble Code Description
21:54:28.057 - resource tree item added - trouble code reader...
21:54:28.728 - resource tree build complete...
21:54:28.808 - serial view build complete...
21:54:28.808 - using comm port 5 [\\.\COM5]
21:54:28.808 - Comms Error - Start [CreateFile] : 2 [0x2]
21:54:30.410 - comms modules started...
21:54:42.307 - Comms Error - Stop [EscapeCommFunction(CLRDTR)] : 6 [0x6]
21:54:42.307 - comms modules stopped...
21:54:42.317 - label data memory released...
21:54:42.317 - data item memory released...
21:54:42.317 - dtc item memory released...
Also the logging to the microsd does not work. I have the file LogCfg.txt in the root folder of the card, but when pressing the defog no log file is generated
type=ssmk
paramname = Engine_Load_(Relative)(%)
paramid = 0x000007
databits = 8
scalingrpn = x,100,*,255,/
paramname = A/F_Correction_#1(%)
paramid = 0x000009
databits = 8
scalingrpn = x,128,-,100,*,128,/
paramname = Manifold_Absolute_Pressure(bar)
paramid = 0x00000D
databits = 8
scalingrpn = x,37,*,255,/,14.50377,/
paramname = Engine_Speed(rpm)
paramid = 0x00000E
databits = 16
scalingrpn = x,4,/
paramname = Throttle_Opening_Angle(%)
paramid = 0x000015
databits = 8
scalingrpn = x,100,*,255,/
paramname = Front_O2_Sensor_#1(V)
paramid = 0x000016
databits = 16
scalingrpn = x,200,/
paramname = Rear_O2_Sensor(V)
paramid = 0x000018
databits = 16
scalingrpn = x,200,/
paramname = Front_O2_Sensor_#2(V)
paramid = 0x00001A
databits = 16
scalingrpn = x,200,/
paramname = Knock_Correction_Advance(degrees)
paramid = 0x000022
databits = 8
scalingrpn = x,128,-,2,/
paramname = Manifold_Relative_Pressure(bar)
paramid = 0x000024
databits = 8
scalingrpn = x,128,-,37,*,255,/,14.50377,/
paramname = Primary_Wastegate_Duty_Cycle(%)
paramid = 0x000030
databits = 8
scalingrpn = x,100,*,255,/
paramname = Gear_Position(gear)
paramid = 0x00004A
databits = 8
scalingrpn = x,1,+
paramname = Exhaust_Gas_Temperature(C)
paramid = 0x000106
databits = 8
scalingrpn = x,40,+,5,*
paramname = Boost_Error*(bar)
paramid = 0x20DFE
databits = 16
scalingrpn = x,32768,-,.001333224,*
paramname = Target_Boost*(bar_relative_sea_level)
paramid = 0x20E02
databits = 16
scalingrpn = x,760,-,0.001333224,*
paramname = defogger_sw
paramid = 0x64
databits = 1
offsetbits = 5
isvisible = 0
conditionrpn = defogger_sw,1,==
action = start
conditionrpn = defogger_sw,0,==
action = stop