openecu.org

hi, i uninstall ecuflash 1.35 and i install the new 1.4 and when i read with ecuflash say and i can´t read:
[15:44:05.521] Version 1.40.2178
[15:44:05.541] 19 memory models read.
[15:44:05.541] scanning for metadata models in C:/Archivos de programa/OpenECU/EcuFlash/rommetadata
[15:44:08.155] 319 ROM metadata models scanned.
[15:44:08.155] checksum module "subarudbw" loaded.
[15:44:08.165] flashing tool "wrx02" loaded.
[15:44:08.165] flashing tool "wrx04" loaded.
[15:44:08.165] flashing tool "sti04" loaded.
[15:44:08.165] flashing tool "sti05" loaded.
[15:44:08.165] flashing tool "mitsukernel" loaded.
[15:44:08.165] flashing tool "mitsukernelocp" loaded.
[15:44:08.165] flashing tool "shbootmode" loaded.
[15:44:08.235] flashing tool "shaudmode" loaded.
[15:44:08.235] flashing tool "subarucan" loaded.
[15:44:34.883] J2534 error [ERR_SUCCESS].
[15:44:34.883] unable to connect to vehicle interface.
[15:44:34.883] interface close

I've got permanent error on the laptop.
After the pressing any read button, black window of cmd.exe says that can't execute some program and write J2534 error in the log field.
Next i'm tryin' the same on another PC - it's update my firmware and that error don't appear on the laptop too.
Maybe firmware updating require interenet connection or just another PC...

AlGontsov wrote:I've got permanent error on the laptop.
After the pressing any read button, black window of cmd.exe says that can't execute some program and write J2534 error in the log field.
Next i'm tryin' the same on another PC - it's update my firmware and that error don't appear on the laptop too.
Maybe firmware updating require interenet connection or just another PC...

In case anyone is wondering, this is fixed with versions 1.41 or later which do firmware updates without spawning another process which may have user privilege issues depending on how your computer is setup.

Colby