Legacy 2.0 R (2006, European)

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Legacy 2.0 R (2006, European)

Postby Legacy06 » Thu Jun 26, 2008 11:55 pm

Hello, We have problem by reading the data, because the software, which is to be downloaded for the tool Tactrix Open Port 1.3U, requires an additional connection besides the OBD port. But we cannot find any. How should we connect the tool Tactrix Open Port 1.3U to the car Subaru Legacy 2.0R (2006 edition)? Which socket to be connected, and where to connect on the car? Many thanks in advance
Legacy06
 
Posts: 2
Joined: Thu Jun 26, 2008 4:30 am
Location: Hungary, Budapest

Postby TunerTools » Fri Jun 27, 2008 4:08 am

Which software are you using?
TunerTools
 
Posts: 51
Joined: Thu Jul 06, 2006 7:21 pm
Location: New England

Postby Jon [in CT] » Fri Jun 27, 2008 5:14 am

The USB connector plugs into the laptop computer. The large connector plugs into the car's OBD-II port (see http://autocenter.weber.edu/OBD-CH/documents/newdocuments/subaru/legacy/2005_subaru_legacy.jpg). The remaining smaller connector is only used with Mitsubishi cars.
Jon [in CT]
 
Posts: 352
Joined: Sat Jan 01, 2005 10:23 am

Postby Legacy06 » Fri Jun 27, 2008 5:57 am

We tried as "Jon" wrote, but the software waited any other connection. The software has been downloaded from the site of TunerTools, it was offered for Tactrix Open Port 1.3U.
Legacy06
 
Posts: 2
Joined: Thu Jun 26, 2008 4:30 am
Location: Hungary, Budapest

Postby TunerTools » Fri Jun 27, 2008 6:04 pm

Legacy,
Please tell us the name of the software application as there are several available on our website and included on the CD that ships with our products.

Cheers,
Lloyd
TunerTools
 
Posts: 51
Joined: Thu Jul 06, 2006 7:21 pm
Location: New England


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 9 guests