It can datalog fine but will not read from the ecu. I get a following message using two different versions of ecuflash.
evo ix
with ecuflash 1.34
[18:22:57.111] Using interface OpenPort 1.3b Mitsu TX38CTz*ea5474d55c201133f140013bc5644ce2233741b9
[18:22:57.111] interface close
[18:22:57.111] unable to connect to vehicle interface.
[18:22:57.111] interface close
with ecuflash 1.29a
[00:28:23.796] This vehicle interface does not support needed features.
[00:28:23.796] unable to connect to vehicle interface