Mitsubishi Galant ECU Read Failure

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Mitsubishi Galant ECU Read Failure

Postby remarque » Fri Apr 04, 2008 9:29 pm

Here my problem I have a 1999 Mitsubishi Galant I tried to read the ECU but a window pops up saying a error has occured heres the log:

TX37w3rGc667b4d9d0b99037197a4a50e4ef64775912bc6f
[16:39:27.078] sending init sequence 1 (0001)
[16:39:30.296] sending init sequence 1 (0003)
[16:39:33.515] sending init sequence 1 (FFFF)
[16:39:36.750] sending init sequence 1 (F0F0)
[16:39:39.500] no response to any known code
[16:39:39.500] interface close
[16:39:39.515] interface close

I also have a 2001 ECU that want use since my 99 ECU is not flashable. I installed it on my car and tried to read the ECU put another window popped up saying a errror has occured. Heres the log:

TX37w3rGc667b4d9d0b99037197a4a50e4ef64775912bc6f
[13:30:17.265] sending init sequence 1 (0001)
[13:30:20.500] sending init sequence 1 (0003)
[13:30:21.546] got 0x05 response
[13:30:21.546] sending init sequence 2
[13:30:21.562] got 0x1B response
[13:30:21.562] sending init sequence 3
[13:30:21.984] entering bootloader
[13:30:21.984] sending kernel size (0)
[13:30:22.031] sending kernel load address (0xFFFF6000)
[13:30:22.062] uploading kernel
[13:30:22.062] verifying kernel checksum response
[13:30:22.078] kernel valid
[13:30:22.078] sending init sequence 2
[13:30:24.109] interface close
[13:30:24.125] interface close

I can here the relays firing, but it just want read. Can some help me.
remarque
 
Posts: 1
Joined: Fri Apr 04, 2008 1:09 pm

Postby spdracr » Tue Apr 22, 2008 10:09 pm

anything on this ?? i cant read mine either
spdracr
 
Posts: 1
Joined: Mon Apr 21, 2008 11:32 pm

Re: Mitsubishi Galant ECU Read Failure

Postby vishel » Thu May 22, 2008 5:34 pm

remarque wrote:Here my problem I have a 1999 Mitsubishi Galant I tried to read the ECU but a window pops up saying a error has occured heres the log:

TX37w3rGc667b4d9d0b99037197a4a50e4ef64775912bc6f
[16:39:27.078] sending init sequence 1 (0001)
[16:39:30.296] sending init sequence 1 (0003)
[16:39:33.515] sending init sequence 1 (FFFF)
[16:39:36.750] sending init sequence 1 (F0F0)
[16:39:39.500] no response to any known code
[16:39:39.500] interface close
[16:39:39.515] interface close


Bump

I would like to know if theres a way around this too. Trying to flash my '99 JDM Mitsubishi Diamante and get the same message.
vishel
 
Posts: 2
Joined: Sun Dec 02, 2007 5:30 pm
Location: Auckland, New Zealand


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 9 guests

cron