OpenPort 1.2 or 1.3 for Subaru DBW on Tactrix.com?

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

OpenPort 1.2 or 1.3 for Subaru DBW on Tactrix.com?

Postby PossumK » Tue May 15, 2007 11:50 pm

Is the OpenPort for Subaru DBW listed on the Tactrix.com store the 1.3 version or the 1.2 version? The description says it is 1.2, but is it an outdated description?

http://www.tactrix.com/product_info.php ... 50623264da

I'm trying to purchase the OpenPort 1.3S for Subarus.
PossumK
 
Posts: 7
Joined: Mon Aug 29, 2005 12:55 am
Location: Redondo Beach, CA

Postby tones111 » Wed May 16, 2007 1:15 pm

I had the same question when I ordered mine a couple months ago. The cable on the site is a 1.3 version. Here's the response I received from them.

You are correct, the detail page for the Subaru DBW is currently out of date -thanks for bringing this to our attention!

You are correct, you would need the Subaru Drive-by-wire cable for your needs, which can be located at the following link:

http://www.tactrix.com/product_info.php?products_id=31

We appreciate you contacting us, and please let us know if you have further questions!


Amanda at Tactrix was very prompt with her responses. Purchasing the cable was quick, easy, and painless and arrived after a couple days. I haven't had any problems with it so far.
tones111
 
Posts: 7
Joined: Tue Mar 22, 2005 3:04 pm

Postby PossumK » Wed May 16, 2007 10:08 pm

Thanks for the confirmation. I'll be upgrading from my OpenPort 1.0 to help with the low programming voltage problem when battery voltage isn't high enough for the older 12V regulators.
PossumK
 
Posts: 7
Joined: Mon Aug 29, 2005 12:55 am
Location: Redondo Beach, CA


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 10 guests

cron