I'm trying to read the ROM of my STi 2006 but I cannot readi it getting the following message at the screen:
[00:57:34.046] SSM2 init
[00:57:34.203] [FF] A2 10 11 43 12 59 40 06 73 FA CB A6 2B 81 FE A8
00 00 00 60 CE 54 F8 B1 E4 80 00 00 00 00 00 00
00 DC 00 00 75 1F 30 80 F0 22 00 00 43 FB 00 F1
81 00 00 00 00 00 00 F0
[00:57:34.203] SSM2 ECU ID is 43 12 59 40 06
[00:57:34.203] SSM2 cmd_0x81
[00:57:34.250] SSM2 cmd_0x83
[00:57:34.296] SSM2 challenge-response
[00:57:34.359] SSM2 challenge is 3F 09 35 43
[00:57:34.359] SSM2 response is 00 40 A4 81
[00:57:34.421] SSM2 cmd_0x10
[00:57:34.781] SSM2 validating kernel ram area addr: FFFF3000 len: 0C98
I'm following step by step all the connecting procedures for the hardware and the green test connector is already connected from factory.
What could be the problem?