Unable to read ecu

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Unable to read ecu

Postby Nick » Sat Mar 03, 2007 8:47 pm

Hi,

I am new to this. I had just received my cable a week ago. And i am try ing it onto my MY06 2.5 EURO STi and my friend MY05 2.0 EURO WRX. can anyone tell me what had been done wrong by me or the software.

The error for the MY05 is this vehicle interface does not support needed features. Unable to connect to vehicle interface.

And the MY06 is
-ssm2_init
- ecu id is 43 42 59 4006
- ssm2_cmd_0*81
- ssm2_cmd_0*83
- denso challenge-response
- challenge is 5E 18 1C 60
- response is 2F 77 ED 14



Cheers[/quote][/url]
Nick
 
Posts: 1
Joined: Sat Feb 10, 2007 1:53 am

Postby blue.taxi » Sun Mar 18, 2007 5:19 pm

My is a MY05 WRX 2.0 UK spec. Also hv problem to read the ECU. Can any 1 help..

00:14:39.905] Version 1.29.906
[00:14:39.915] 8 memory models read.
[00:14:42.739] 142 ROM metadata models read.
[00:14:42.739] checksum module "subarudbw" loaded.
[00:14:42.739] flashing tool "wrx02" loaded.
[00:14:42.749] flashing tool "wrx04" loaded.
[00:14:42.749] flashing tool "sti04" loaded.
[00:14:42.749] flashing tool "sti05" loaded.
[00:14:42.749] flashing tool "mitsukernel" loaded.
[00:14:42.749] flashing tool "mitsukernelocp" loaded.
[00:14:42.749] flashing tool "mitsubootloader" loaded.
[00:14:55.918] ssm2_init
[00:14:56.088] ECU ID is 3D 44 58 30 05
[00:14:56.088] ssm2_cmd_0x81

end.
blue.taxi
 
Posts: 61
Joined: Sun Jul 23, 2006 8:38 am

Postby blue.taxi » Thu May 10, 2007 12:37 am

Up date... Finally read my MY05 ECU rom.

Using ecuflash 1.3 to read it, then flash it w/ enginuity, for the time just some minor mod at the boost & AFR. Later decat then will go for the timing.
blue.taxi
 
Posts: 61
Joined: Sun Jul 23, 2006 8:38 am

Postby ravenhil » Wed May 23, 2007 7:26 pm

i have no problem with my MY02 edm wrx but i just can't seem to connect to a MY03 edm wrx.

The log is as follows

[01:42:16.671] Version 1.30.1095
[01:42:16.687] 8 memory models read.
[01:42:17.718] 145 ROM metadata models read.
[01:42:17.718] checksum module "subarudbw" loaded.
[01:42:17.718] flashing tool "wrx02" loaded.
[01:42:17.718] flashing tool "wrx04" loaded.
[01:42:17.718] flashing tool "sti04" loaded.
[01:42:17.718] flashing tool "sti05" loaded.
[01:42:17.718] flashing tool "mitsukernel" loaded.
[01:42:17.718] flashing tool "mitsukernelocp" loaded.
[01:42:17.718] flashing tool "mitsubootloader" loaded.
[01:42:36.468] SSM2 init
[01:42:36.640] [FF] A2 10 0F 2E 44 58 60 05 73 FA EB 80 2B C3 02 AA
00 10 00 60 CE 54 FC B0 60 00 00 E0 00 00 00 00
00 DC 00 00 55 1C 00 00 02 00 00 00 00 00 00 80
00 00 00 00 00 00 00 00
[01:42:36.640] SSM2 ECU ID is 2E 44 58 60 05
[01:42:36.640] SSM2 cmd_0x81
[01:43:30.609] 163840 byte image read.

I would really appreciate any help on this one.
ravenhil
 
Posts: 46
Joined: Fri May 04, 2007 8:09 pm

Postby blue.taxi » Wed May 30, 2007 5:50 pm

try to use the 02-03 wrx to read, as my MY05 also use the 02-03 to read it, 04-05 cannot read the MY05 EDM.
blue.taxi
 
Posts: 61
Joined: Sun Jul 23, 2006 8:38 am

Postby MARC CANTWELL » Tue Jul 03, 2007 8:46 am

i'm getting the same message for my 05 sti and i tried my sister 04 sti and does the same thing? i have the connector but do not know where to put them?
MARC CANTWELL
 
Posts: 5
Joined: Wed Jun 27, 2007 8:44 am
Location: AZ

Postby ravenhil » Sat Aug 04, 2007 6:47 am

also tried to read the rom of a Impreza TS (1.6L) and i got this...

[14:50:48.859] Version 1.30.1095
[14:50:48.859] 8 memory models read.
[14:50:51.703] ROM metadata models A8DH200Y.xml is invalid.
[14:50:51.734] 146 ROM metadata models read.
[14:50:51.734] checksum module "subarudbw" loaded.
[14:50:51.734] flashing tool "wrx02" loaded.
[14:50:51.750] flashing tool "wrx04" loaded.
[14:50:51.750] flashing tool "sti04" loaded.
[14:50:51.750] flashing tool "sti05" loaded.
[14:50:51.750] flashing tool "mitsukernel" loaded.
[14:50:51.750] flashing tool "mitsukernelocp" loaded.
[14:50:51.750] flashing tool "mitsubootloader" loaded.
[14:51:00.703] SSM2 init
[14:51:00.875] [FF] A1 10 06 43 46 10 30 05 F3 EA AB 89 A2 0E 00 A8
00 00 00 60 CE 54 FC B8 01 00 00 E0 00 00 00 00
00 DC 00 00 71 1F 00 00 00 00 00 00 00 00 00 E0
00 00 00 00 00 00 00 00
[14:51:00.875] SSM2 ECU ID is 43 46 10 30 05
[14:51:00.875] SSM2 cmd_0x81
[14:51:17.578] denso02_bootloader_cmd_start
[14:51:18.968] denso02_bootloader_cmd_start
[14:51:20.359] denso02_bootloader_cmd_start
[14:51:21.750] denso02_bootloader_cmd_start
[14:51:23.140] denso02_bootloader_cmd_start
[14:51:23.750] kernel get version

What do I need to do to get it to work? Man, I am willing to pay to make it work with a TS.
ravenhil
 
Posts: 46
Joined: Fri May 04, 2007 8:09 pm


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 7 guests