Cannot hold communication with the ecu
Posted: Tue Jan 09, 2007 11:12 pm
Hi guys. Not sure what's the go here but I am having major difficulties getting communication with the ecu. Only once have I managed to get a steady comm with the ecu and download the data. Every other time I have tried, it has been unsuccessful.
If I withdraw the USB cable and re-insert, I get the bottom left corner of screen showing OpenPort 1.3 Subaru etc, but then it disappears after 1 sec. It seems that maybe the USB to serial port thing is not set up properly (but I am guessing here).
Green connectors are linked and the white plug is in.
Car is an Aussie 02 wrx manual.
Any suggestions to how I should get this thing to talk?
If I withdraw the USB cable and re-insert, I get the bottom left corner of screen showing OpenPort 1.3 Subaru etc, but then it disappears after 1 sec. It seems that maybe the USB to serial port thing is not set up properly (but I am guessing here).
Green connectors are linked and the white plug is in.
Car is an Aussie 02 wrx manual.
Any suggestions to how I should get this thing to talk?