Help! Cannot read ECU

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Help! Cannot read ECU

Postby hoohar » Sun Jan 07, 2007 6:07 am

Hi,

Ive just bought a Tactrix cable, plugged it in to my 04 UK STi PPP and can't get ECUFlash, ECUEXplorer or any other software to 'read' the ECU. As far as Ican see there is not an option for 04 EDU STi, just WRX or DBW.
I've tried with the green jumpers connected and disconnected. I can get the ECU ID but then ECUFlash says error - read log.

Any ideas? I have not connected the flash cable as all I want to do is log at the moment.

The Openport 1.3 was installed during the ECUFlash installation and I can see the COM setting as COM8 (as my bluetooth adapter is taking COM5)

Please help this newbie...
hoohar
 
Posts: 1
Joined: Tue Jan 02, 2007 1:02 pm

Postby cboles » Wed Jan 10, 2007 3:14 pm

can you post the actual log? you should be able to read using the 04-05 WRX option. it is possible that the PPP version of the ROM is not readable or reflashable by the standard SSM commands - I am not sure.

Colby
cboles
Site Admin
 
Posts: 1233
Joined: Wed Dec 29, 2004 5:45 pm
Location: Seattle, WA


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 9 guests