Re: ECU on bench
Posted: Thu Jan 29, 2009 8:18 amno one can help ?
I have tried everything that was written on this post but I cannot communicate with my STI ecu.
[18:02:43.149] Device Firmware Version: 1.07.2597
[18:02:44.287] kernel get version
[18:02:44.646] SSM2 init
[18:02:44.808] SSM2 ECU ID is 2E 44 59 61 05
qoncept wrote:
Peewee, I'm not sure if the wires are the same at the ECU harness and if your ECU is the same, but in this picture you can see the ones that need to be jumped.
