ECU on bench

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Re: ECU on bench

Postby FoxHound » Thu Jan 29, 2009 8:18 am

no one can help ?
FoxHound
 
Posts: 3
Joined: Mon Jan 26, 2009 8:35 am

Re:

Postby pizzaman » Thu Sep 30, 2010 11:48 am

How can I make these connections on the bench?
I have tried everything that was written on this post but I cannot communicate with my STI ecu.

[18:02:43.149] Device Firmware Version: 1.07.2597
[18:02:44.287] kernel get version
[18:02:44.646] SSM2 init
[18:02:44.808] SSM2 ECU ID is 2E 44 59 61 05

qoncept wrote:Image
Peewee, I'm not sure if the wires are the same at the ECU harness and if your ECU is the same, but in this picture you can see the ones that need to be jumped.
pizzaman
 
Posts: 2
Joined: Thu Sep 30, 2010 11:26 am

Previous

Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 13 guests