Hi All,
Sorry if I ask simple questions. I've bought openport 2. When I connected it to a laptop using usb it didn't work.
I have Mitsubishi Lancer 2006 2.4l 4G49. Then I noticed another connector in a car and inserted into it mitsubishi reflash connector for pre-CAN vehicles. I connected this reflash connector and Openport with the cable which was in openport2 box.
I use 1.44 Ecuflash. When I started it it said that it can't find ftd2xx.dll. I found that file in openport 1.3 folder. Copied to the folder where ecuflash was. Started it and no error.
To read ROM I selected Mitsubishi Ralliart 256k as it was said here
After that it started doing something a car did 2-3 clicks and program started read data from ecu. When it finished it showed message box with the text "All operations are completed successfully. If you're done with your ECU, turn the ignition off". I turned ignition off. Pressed "OK" button it showed me dialog "Unknown ROM image". After 5-15 second dialog disappeared and ecu flash closed unexpectedly(probably bug).
I started once again ECUFlash and it started closing unexpectedly 10-50 seconds after start. I reinstalled ecu flash, started again and it didn't close unexpectedly. I repeated all over again and was able to make screenshoot. As I understand I don't have a definition file, but why it closes after 10-15 seconds? Could it be that I use not the right FTD2xx.dll? I use Windows XP Tablet Edition Service pack 2.
Both times I noticed the file appears in the uploads folder. It has the name "56324bd9_M32176F4_mitsubootloader.srf".
Does it mean that I need definition for 56324bd9? If yes where can I find it?