what do i need to do to get in to the tcu of 05 legacy gt

Links to development tools which have been useful to this project

Moderator: Freon

what do i need to do to get in to the tcu of 05 legacy gt

Postby frank_ster » Tue Nov 11, 2008 11:34 am

I am here seaking information on how i would be able to get in to the tcu. The tcu being the limiting factor of all electronic automatic cars.
I have made my own full manual set up using a ratchet shifter in 2 other cars but i do not want to start hacking up my legacy just yet. I see there is a need for this for many others. because the auto trannys have in a sence a closed loop learing built in for time to shift to maintian smoothness. so any modifications to the valve body or pressure control end up being tuned out.

Also i am sick of oem shifting protocalls, ie when the car is in manual mode .. its still not truley manual the worst part being down shifting takes a long time if i give it a shot of gas to get the sped to sync the shift ends up taking even longer.

Imagine not being able to tune the engine and turn off other safety's trying to make power with little bolt ons that do nothing.

I have been looking through defenitions how they work and from what i see its very simalair to simple micro processors each cofiguration has an address.

so whos leg do i have to hump to learn how to do this ?
frank_ster
 
Posts: 2
Joined: Tue Nov 11, 2008 4:44 am

Re: what do i need to do to get in to the tcu of 05 legacy g

Postby rcdreamfly » Sun Jul 08, 2012 3:50 am

Also i am sick of oem shifting protocalls, ie when the Rc Helicopters Reviews is in manual mode .. its still not truley manual the worst part being down shifting takes a long time if i give it a shot of gas to get the sped to Rc Hobby the shift ends up taking even longer.
rcdreamfly
 
Posts: 3
Joined: Thu Jul 05, 2012 10:04 pm

Re: what do i need to do to get in to the tcu of 05 legacy g

Postby frank_ster » Sun Jul 08, 2012 7:22 am

4 years later? hahah

well im going megasquirt / mega shift ..
frank_ster
 
Posts: 2
Joined: Tue Nov 11, 2008 4:44 am


Return to Development Tools

Who is online

Users browsing this forum: No registered users and 1 guest

cron