Page 1 of 1

Scanner Data-Logger for old 1990-1998 SUBARU is on the way..

PostPosted: Tue Sep 19, 2006 11:33 am
by Imp Guerra
Have a look at

http://www.obdtool.org/hidash.htm

HiDash HiTachi Subaru Scanner is designed for diagnostic communication with OLD pre1999 vehicles that do not have J1962 connector but have special DLC instead.

Soft has

Live_Data
Digi_Data
Graph
and Performance 1/4 ; 1/8; 1Km; 1 Mile time/speed results
and 0-100 km/h Time result

Scanner is based upon pre programmed (dumped) MCU with our originally designed firmware, that incorporates all features of old FHI protocol and provides extra fast communication speed.
Software does not have any machine_ID (PC_bondage) or time limitations.
Software was written with Visual C++. Only winAPI. No DLL and OCX.
Only PE file (*.exe)

Software is originally written in English.
We also plan Spain and Italian support.
Developers are located in the city of Minsk, the Capital of Belarus.
(CIS, former USSR)

PostPosted: Tue Sep 19, 2006 11:37 am
by Imp Guerra
Performance Window

PostPosted: Tue Sep 19, 2006 9:49 pm
by Ladis
I see there also XiDash and it looks like cracked EcuTek Delta Dash, also description of product is copy&paste from DeltaDash manual.

Bloody pirates :-)

PostPosted: Wed Sep 20, 2006 9:56 am
by Imp Guerra
XiDash is XiDash.

Here we speak about HiDash 1990-1998 subarus scanner and soft of our original designe :)

cos new cars since 1999 Denso ECU can be read with a lot of SW.
Tari, Ecutek, XiDash, WPSM and so on...

PostPosted: Thu Nov 23, 2006 10:59 am
by Imp Guerra
HiDash old SUBARU Scanner & Data-Logger

site:
http://www.obdtool.org/hidash.htm

Manual DownLoad (in Russian):
http://www.obdtool.org/hidashmanual.zip

SoftWare DownLoad:
http://www.obdtool.org/HiDashScan.rar
use "free" install serial number:
+375-29-667-11-23
:P

PostPosted: Thu Nov 23, 2006 2:38 pm
by west_minist
What about the connector?

PostPosted: Thu Nov 23, 2006 2:44 pm
by Imp Guerra
Scanner has all cables needed, including SUBARU-9-pin connector

Image

PostPosted: Thu Nov 23, 2006 4:44 pm
by west_minist
So that is the cost in $USD and shipping.

PostPosted: Thu Nov 23, 2006 4:55 pm
by Imp Guerra
Cost of the scanner is $250
(soft is free on the site, also update for the soft will be free)

Shipping:

either
with Belorussian AVIA mail $10 (approx. 12-15 days to USA)
or
with EMS (Express Mail Service) $35 (approx. 5-6 days to USA)

You are to choose delivery for yourself.

If you need International Proforma Invoice - then ask me via e-mail
(email is on the site OBDtool.Org)

And we can discuss your local Custom - Tax fees as well...
:)