Openport 2.0 no response f ECU WRX

Announcements, dicussion about any topic that would have broad interest to the forum members

Moderator: Freon

Openport 2.0 no response f ECU WRX

Postby vp83 » Sat Jun 30, 2012 3:55 am

Hi, everyone!

I try to read DTSc with evoscan with OP2.0 but
EcuFlash seems to work, but when I try Display DTCs with Evoscan it gives me:
Info: OpenPort 2.0 Found.
Info: OpenPort Firmware v1.11.320
Info: Battery 13.572V
Info: Initialize Vehicle ECU...
Info: OBDII Connecting...
Info: Initializing At 5 baud...
Info: Initialization Complete...
Info: OBDII Sync Byte Received.
Info: Keybyte Response: 0x08 0x08
Info: OBDII Keyword CRC Received.
Info: Waiting for vehicle ecu...
Info: Connecting...
Info: OpenPort 2.0 Found.
Info: OpenPort Firmware v1.11.320
Info: Battery 13.659V
Info: Initialize Vehicle ECU...
Info: OBDII Connecting...
Info: Initializing At 5 baud...
Info: Initialization Complete...
Info: OBDII Sync Byte Received.
Info: Keybyte Response: 0x08 0x08
Info: OBDII Keyword CRC Received.
Info: No Response from Vehicle ECU
Info: Check DTCs Complete.

So DTCs give me:
No Response from Vehicle ECU

battery is new, voltage ok
does I miss some install data? drivers?

first I Install EcuFlash then EvoScan, then reinstal those few times
I tried EvoScan 2.8 and 2.9
the same

what does I miss?
vp83
 
Posts: 1
Joined: Fri Jun 29, 2012 12:08 am

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 11 guests