openecu.org

Forums for ECU reverse engineering and modification

Skip to content

problems with entering read and write mode with 2.0

Announcements, dicussion about any topic that would have broad interest to the forum members

Moderator: Freon

Post a reply

problems with entering read and write mode with 2.0

Postby Josh Long » Wed Mar 25, 2009 10:06 pm

The problem in a nutshell is inconsistancy getting the ecu into the read and write mode. I have a thread on romraider and this appears to be a problem a few other people are having too.


Here are back to back attemps to read. the first not working the next working perfectly.

first the ecuflash log

[15:01:11.031] EcuFlash Version 1.41.2483
[15:01:11.031] OS Version Windows XP
[15:01:11.031] Qt Version 4.4.0
[15:01:11.062] 26 memory models read.
[15:01:11.078] scanning for metadata models in D:/Logs n Stuff/tuning docs and software/ecu flash/EcuFlash/rommetadata
[15:01:17.468] 331 ROM metadata models scanned.
[15:01:17.468] checksum module "subarudbw" loaded.
[15:01:17.468] checksum module "mitsucan" loaded.
[15:01:17.468] flashing tool "wrx02" loaded.
[15:01:17.484] flashing tool "wrx04" loaded.
[15:01:17.484] flashing tool "sti04" loaded.
[15:01:17.484] flashing tool "sti05" loaded.
[15:01:17.484] flashing tool "mitsukernel" loaded.
[15:01:17.484] flashing tool "mitsukernelocp" loaded.
[15:01:17.484] flashing tool "mitsubootloader" loaded.
[15:01:17.484] flashing tool "shbootmode" loaded.
[15:01:17.718] flashing tool "shaudmode" loaded.
[15:01:17.734] flashing tool "subarucan" loaded.
[15:01:17.734] flashing tool "mitsucan" loaded.
[15:01:26.171] J2534 API Version: 04.04
[15:01:26.171] J2534 DLL Version: 0.50.2464 (DEBUG) Jan 29 2009 10:58:58
[15:01:26.171] Device Firmware Version: 1.05.2463
[15:01:31.265] denso02_bootloader_cmd_start
[15:01:32.484] denso02_bootloader_cmd_start
[15:01:33.703] denso02_bootloader_cmd_start
[15:01:34.921] denso02_bootloader_cmd_start
[15:01:36.140] denso02_bootloader_cmd_start
[15:01:36.562] kernel get version
[15:01:36.875] interface close
[15:01:36.890] interface close
[15:02:16.328] J2534 API Version: 04.04
[15:02:16.328] J2534 DLL Version: 0.50.2464 (DEBUG) Jan 29 2009 10:58:58
[15:02:16.328] Device Firmware Version: 1.05.2463
[15:02:24.015] denso02_bootloader_cmd_start
[15:02:24.359] writing kernel area addr: 020000 len: 0664
[15:02:26.546] kernel get version
[15:02:26.578] kernel version is : OpenECU Subaru HC16 Kernel V1.05
[15:02:26.593] reading kernel comm buffer size
[15:02:26.640] comm buffer size set to 512
[15:02:26.640] reading kernel flash buffer size
[15:02:26.687] flash buffer size set to 4096
[15:02:26.687] -- dumping ECU memory --


Then the debug view:

[2208] PassThruIoctl returned result 0
[2208] PassThruOpen(name=,pDeviceID=@094F1198)
[2208] opening device on port COM10
[2208] W 0D 0A 0D 0A 61 74 69 0D 0A ....ati..
[2208] R 61 72 69 20 6D 61 69 6E 20 63 6F 64 65 20 76 65 ari main code ve
[2208] 72 73 69 6F 6E 20 3A 20 31 2E 30 35 2E 32 34 36 rsion : 1.05.246
[2208] 33 0D 0A 3..
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 61 0D 0A ata..
[2208] PassThruOpen returned result 0 and DeviceID 1
[2208] PassThruReadVersion(DeviceID=1,pFirmwareVersion=@0012C164,pDllVersion=@0012C064,pApiVersion=@0012BF64)
[2208] PassThruReadVersion returned result 0 and FirmwareVersion [1.05.2463], DllVersion [0.50.2464 (DEBUG) Jan 29 2009 10:58:58], ApiVersion [04.04]
[2208] PassThruConnect(DeviceID=1,ProtocolID=3,Flags=00000200,Baudrate=4800,pChannelID=@094F119C)
[2208] W 61 74 6F 33 20 35 31 32 20 34 38 30 30 0D 0A ato3 512 4800..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruConnect returned result 0 and ChannelID 3
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0012BF14,pOutputMsgID=@00000000)
[2208] PARITY : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 32 32 20 30 0D 0A ats3 22 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] P1_MAX : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 37 20 30 0D 0A ats3 7 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] P3_MIN : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 31 30 20 30 0D 0A ats3 10 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] P4_MIN : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 31 32 20 30 0D 0A ats3 12 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] LOOPBACK : 1
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 33 20 31 0D 0A ats3 3 1..
[2208] PassThruIoctl returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruStartMsgFilter(ChannelID=3,FilterType=1,pMaskMsg=@001291B4,pPatternMsg=@0012B224,pFlowControlMsg=@0012A1EC,pMsgID=@0012C280)
[2208] MaskMsg
[2208] ProtocolID=3,RxStatus=0,TxFlags=64,Timestamp=0,DataSize=4,ExtraDataIndex=0
[2208] 00 00 00 00 ....
[2208] PatternMsg
[2208] ProtocolID=3,RxStatus=0,TxFlags=64,Timestamp=0,DataSize=4,ExtraDataIndex=0
[2208] 00 00 00 00 ....
[2208] FlowControlMsg
[2208] ProtocolID=3,RxStatus=0,TxFlags=64,Timestamp=0,DataSize=4,ExtraDataIndex=0
[2208] 00 00 00 00 ....
[2208] W 61 74 66 33 20 31 20 36 34 20 34 0D 0A atf3 1 64 4..
[2208] R 61 72 66 33 20 30 0D 0A arf3 0..
[2208] W 00 00 00 00 00 00 00 00 ........
[2208] PassThruStartMsgFilter returned result 0 and MsgID 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0A78FED4,pOutputMsgID=@00000000)
[2208] DATA_RATE : 9600
[2208] W 61 74 73 33 20 31 20 39 36 30 30 0D 0A ats3 1 9600..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967295)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 31 0D 0A atv 9 -1..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=3,pMsg=@0A78EE78,pNumMsgs=@0A78EE74,Timeout=300)
[2208] W 61 74 74 33 20 33 20 30 0D 0A 4D FF B4 att3 3 0..M..
[2208] R 61 72 6F 0D 0A aro..
[2208] ProtocolID=3,RxStatus=0,TxFlags=0,Timestamp=0,DataSize=3,ExtraDataIndex=0
[2208] W 4D FF B4 M..
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 05 A0 05 56 26 D1 ar3...V&.
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=89532113,DataSize=0,ExtraDataIndex=156302264
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 04 20 4D FF B4 ar3. M..
[2208] R 61 72 33 05 60 05 56 2F 37 ar3.`.V/7
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=89534263,DataSize=3,ExtraDataIndex=156302264
[2208] R 4D FF B4 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE98,NumMsgs=1,Timeout=300)
[2208] PassThruReadMsgs returned result 9
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967295)
[2208] W 61 74 76 20 39 20 2D 31 0D 0A atv 9 -1..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=3,pMsg=@0A78EE78,pNumMsgs=@0A78EE74,Timeout=300)
[2208] W 61 74 74 33 20 33 20 30 0D 0A 4D FF B4 att3 3 0..M..
[2208] R 61 72 6F 0D 0A aro..
[2208] ProtocolID=3,RxStatus=175697556,TxFlags=0,Timestamp=156176440,DataSize=3,ExtraDataIndex=0
[2208] W 4D FF B4 M..
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 05 A0 05 68 BF 8B ar3...h..
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=90750859,DataSize=0,ExtraDataIndex=155599240
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 04 20 4D FF B4 ar3. M..
[2208] R 61 72 33 05 60 05 68 C7 E5 ar3.`.h..
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=90752997,DataSize=3,ExtraDataIndex=155599240
[2208] R 4D FF B4 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE98,NumMsgs=1,Timeout=300)
[2208] PassThruReadMsgs returned result 9
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967295)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 31 0D 0A atv 9 -1..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=3,pMsg=@0A78EE78,pNumMsgs=@0A78EE74,Timeout=300)
[2208] W 61 74 74 33 20 33 20 30 0D 0A 4D FF B4 att3 3 0..M..
[2208] R 61 72 6F 0D 0A aro..
[2208] ProtocolID=3,RxStatus=175697556,TxFlags=0,Timestamp=156176440,DataSize=3,ExtraDataIndex=0
[2208] W 4D FF B4 M..
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 05 A0 05 7B 55 76 ar3...{Uv
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=91968886,DataSize=0,ExtraDataIndex=156303200
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 04 20 4D FF B4 ar3. M..
[2208] R 61 72 33 05 60 05 7B 5D DC ar3.`.{].
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=91971036,DataSize=3,ExtraDataIndex=156303200
[2208] R 4D FF B4 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE98,NumMsgs=1,Timeout=300)
[2208] PassThruReadMsgs returned result 9
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967295)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 31 0D 0A atv 9 -1..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=3,pMsg=@0A78EE78,pNumMsgs=@0A78EE74,Timeout=300)
[2208] W 61 74 74 33 20 33 20 30 0D 0A 4D FF B4 att3 3 0..M..
[2208] R 61 72 6F 0D 0A aro..
[2208] ProtocolID=3,RxStatus=175697556,TxFlags=0,Timestamp=156176440,DataSize=3,ExtraDataIndex=0
[2208] W 4D FF B4 M..
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 05 A0 05 8D F0 35 ar3.....5
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=93188149,DataSize=0,ExtraDataIndex=155447432
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 04 20 4D FF B4 ar3. M..
[2208] R 61 72 33 05 60 05 8D F8 A9 ar3.`....
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=93190313,DataSize=3,ExtraDataIndex=155447432
[2208] R 4D FF B4 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE98,NumMsgs=1,Timeout=300)
[2208] PassThruReadMsgs returned result 9
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967295)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 31 0D 0A atv 9 -1..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=1,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=3,pMsg=@0A78EE78,pNumMsgs=@0A78EE74,Timeout=300)
[2208] W 61 74 74 33 20 33 20 30 0D 0A 4D FF B4 att3 3 0..M..
[2208] R 61 72 6F 0D 0A aro..
[2208] ProtocolID=3,RxStatus=175697556,TxFlags=0,Timestamp=156176440,DataSize=3,ExtraDataIndex=0
[2208] W 4D FF B4 M..
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 05 A0 05 A0 88 8E ar3......
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=94406798,DataSize=0,ExtraDataIndex=155420688
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE58,NumMsgs=1,Timeout=300)
[2208] R 61 72 33 04 20 4D FF B4 ar3. M..
[2208] R 61 72 33 05 60 05 A0 90 F5 ar3.`....
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=94408949,DataSize=3,ExtraDataIndex=155420688
[2208] R 4D FF B4 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78EE98,NumMsgs=1,Timeout=300)
[2208] PassThruReadMsgs returned result 9
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0A78FED4,pOutputMsgID=@00000000)
[2208] DATA_RATE : 39473
[2208] W 61 74 73 33 20 31 20 33 39 34 37 33 0D 0A ats3 1 39473..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=3,pMsg=@0A78ED54,pNumMsgs=@0A78ED50,Timeout=200)
[2208] W 61 74 74 33 20 36 20 30 0D 0A BE EF 00 01 01 AF att3 6 0........
[2208] R 61 72 6F 0D 0A aro..
[2208] ProtocolID=3,RxStatus=2089877565,TxFlags=0,Timestamp=159121408,DataSize=6,ExtraDataIndex=0
[2208] W BE EF 00 01 01 AF ......
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78ED34,NumMsgs=1,Timeout=200)
[2208] R 61 72 33 05 A0 05 A7 01 74 ar3.....t
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=94830964,DataSize=0,ExtraDataIndex=156302264
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78ED34,NumMsgs=1,Timeout=200)
[2208] R 61 72 33 07 20 BE EF 00 01 01 AF ar3. ......
[2208] R 61 72 33 05 60 05 A7 06 AB ar3.`....
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=94832299,DataSize=6,ExtraDataIndex=156302264
[2208] R BE EF 00 01 01 AF ......
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=3,pMsg=@0A78AD30,NumMsgs=1,Timeout=200)
[2208] PassThruReadMsgs returned result 9
[2208] PassThruIoctl(ChannelID=3,Ioctl=SET_CONFIG,pInput=@0A78FED4,pOutputMsgID=@00000000)
[2208] DATA_RATE : 4800
[2208] W 61 74 73 33 20 31 20 34 38 30 30 0D 0A ats3 1 4800..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=3,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruDisconnect(ChannelID=3)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 63 33 0D 0A atc3..
[2208] PassThruDisconnect returned result 0
[2208] PassThruClose(1)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 7A 0D 0A atz..
[2208] PassThruClose returned result 0
[2208] PassThruIoctl(ChannelID=0,Ioctl=SET_DLL_DEBUG_FLAGS,pInput=@00000003,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruOpen(name=,pDeviceID=@094F1198)
[2208] opening device on port COM10
[2208] W 0D 0A 0D 0A 61 74 69 0D 0A ....ati..
[2208] R 61 72 69 20 6D 61 69 6E 20 63 6F 64 65 20 76 65 ari main code ve
[2208] 72 73 69 6F 6E 20 3A 20 31 2E 30 35 2E 32 34 36 rsion : 1.05.246
[2208] 33 0D 0A 3..
[2208] W 61 74 61 0D 0A ata..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruOpen returned result 0 and DeviceID 2
[2208] PassThruReadVersion(DeviceID=2,pFirmwareVersion=@0012C164,pDllVersion=@0012C064,pApiVersion=@0012BF64)
[2208] PassThruReadVersion returned result 0 and FirmwareVersion [1.05.2463], DllVersion [0.50.2464 (DEBUG) Jan 29 2009 10:58:58], ApiVersion [04.04]
[2208] PassThruConnect(DeviceID=2,ProtocolID=3,Flags=00000200,Baudrate=4800,pChannelID=@094F119C)
[2208] W 61 74 6F 33 20 35 31 32 20 34 38 30 30 0D 0A ato3 512 4800..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruConnect returned result 0 and ChannelID 4
[2208] PassThruIoctl(ChannelID=4,Ioctl=SET_CONFIG,pInput=@0012BF14,pOutputMsgID=@00000000)
[2208] PARITY : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 32 32 20 30 0D 0A ats3 22 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] P1_MAX : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 37 20 30 0D 0A ats3 7 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] P3_MIN : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 31 30 20 30 0D 0A ats3 10 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] P4_MIN : 0
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 31 32 20 30 0D 0A ats3 12 0..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=SET_CONFIG,pInput=@0012C264,pOutputMsgID=@00000000)
[2208] LOOPBACK : 1
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 73 33 20 33 20 31 0D 0A ats3 3 1..
[2208] PassThruIoctl returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=2,Pin=9,Voltage=4294967294)
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruStartMsgFilter(ChannelID=4,FilterType=1,pMaskMsg=@001291B4,pPatternMsg=@0012B224,pFlowControlMsg=@0012A1EC,pMsgID=@0012C280)
[2208] MaskMsg
[2208] ProtocolID=3,RxStatus=0,TxFlags=64,Timestamp=0,DataSize=4,ExtraDataIndex=0
[2208] 00 00 00 00 ....
[2208] PatternMsg
[2208] ProtocolID=3,RxStatus=0,TxFlags=64,Timestamp=0,DataSize=4,ExtraDataIndex=0
[2208] 00 00 00 00 ....
[2208] FlowControlMsg
[2208] ProtocolID=3,RxStatus=0,TxFlags=64,Timestamp=0,DataSize=4,ExtraDataIndex=0
[2208] 00 00 00 00 ....
[2208] W 61 74 66 33 20 31 20 36 34 20 34 0D 0A atf3 1 64 4..
[2208] R 61 72 66 33 20 30 0D 0A arf3 0..
[2208] W 00 00 00 00 00 00 00 00 ........
[2208] PassThruStartMsgFilter returned result 0 and MsgID 0
[2208] PassThruSetProgrammingVoltage(DeviceID=2,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=SET_CONFIG,pInput=@0A88FED4,pOutputMsgID=@00000000)
[2208] DATA_RATE : 9600
[2208] W 61 74 73 33 20 31 20 39 36 30 30 0D 0A ats3 1 9600..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=2,Pin=9,Voltage=4294967294)
[2208] R 61 72 6F 0D 0A aro..
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=2,Pin=9,Voltage=4294967295)
[2208] W 61 74 76 20 39 20 2D 31 0D 0A atv 9 -1..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruSetProgrammingVoltage(DeviceID=2,Pin=9,Voltage=4294967294)
[2208] W 61 74 76 20 39 20 2D 32 0D 0A atv 9 -2..
[2208] R 61 72 6F 0D 0A aro..
[2208] PassThruSetProgrammingVoltage returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_TX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruIoctl(ChannelID=4,Ioctl=CLEAR_RX_BUFFER,pInput=@00000000,pOutputMsgID=@00000000)
[2208] PassThruIoctl returned result 0
[2208] PassThruWriteMsgs(ChannelID=4,pMsg=@0A88EE78,pNumMsgs=@0A88EE74,Timeout=300)
[2208] W 61 74 74 33 20 33 20 30 0D 0A 4D FF B4 att3 3 0..M..
[2208] R 61 72 6F 0D 0A aro..
[2208] R 61 72 33 05 A0 08 7B 1C 33 ar3...{.3
[2208] R 61 72 33 04 20 4D FF B4 ar3. M..
[2208] R 61 72 33 05 60 08 7B 24 9E ar3.`.{$.
[2208] ProtocolID=3,RxStatus=0,TxFlags=0,Timestamp=0,DataSize=3,ExtraDataIndex=0
[2208] W 4D FF B4 M..
[2208] PassThruWriteMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=4,pMsg=@0A88EE58,NumMsgs=1,Timeout=300)
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=142285875,DataSize=0,ExtraDataIndex=160705328
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] R 61 72 33 05 80 08 7B 30 EE 61 72 33 04 00 4D 00 ar3...{0.ar3..M.
[2208] B3 61 72 33 05 40 08 7B 3F 50 .ar3.@.{?P
[2208] PassThruReadMsgs(ChannelID=4,pMsg=@0A88EE58,NumMsgs=1,Timeout=300)
[2208] ProtocolID=3,RxStatus=1,TxFlags=0,Timestamp=142288030,DataSize=3,ExtraDataIndex=160705328
[2208] R 4D FF B4 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=4,pMsg=@0A88EE98,NumMsgs=1,Timeout=300)
[2208] ProtocolID=3,RxStatus=2,TxFlags=0,Timestamp=142291182,DataSize=0,ExtraDataIndex=0
[2208] R
[2208] PassThruReadMsgs returned result 0
[2208] PassThruReadMsgs(ChannelID=4,pMsg=@0A88EE98,NumMsgs=1,Timeout=300)
[2208] ProtocolID=3,RxStatus=0,TxFlags=0,Timestamp=142294864,DataSize=3,ExtraDataIndex=0
[2208] R 4D 00 B3 M..
[2208] PassThruReadMsgs returned result 0
[2208] PassThruWriteMsgs(ChannelID=4,pMsg=@0A88EE4C,pNumMsgs=@0A88EE48,Timeout=2000)
..


I did trim the second log as I did not think anymore was needed.

Hope this helps

Josh
Josh Long
 
Posts: 2
Joined: Sat Jun 16, 2007 8:43 am
Top

Re: problems with entering read and write mode with 2.0

Postby Josh Long » Fri Mar 27, 2009 8:46 pm

Here is a better explination of what my problem is~

I have read and flashed with the 1.3 cable I had hundreds of times. I have read and flashed with the 2.0 maybe a dozen times. It seems like it is a 1 out of 10 sucess rate with the 2.0 whereas it was 10 for 10 with the old cable. ( Unless I made a mistake)

I am currently using ecu flash 1.41 and the standard defs .8.2b.

What is not working quite right is that it will not enter write mode. if I key the car up at the same rate as the old cable it will not enter write mode it enters test mode. (cycling fans) Ecu flash gives the standard cannot flash message (see above ecuflash log, ie. when the plugs are not connected, no flash block etc.)

operatiing system is xp, the computer is an asus eee pc.

I am currently experiencing success every other time. I recently even completed an entire tune (10ish flashes and one read) without any hiccups on an 04 WRX. I then tried on my car 02 wrx , switch wired for the "test mode connectors" and perminant flash jumper. I got the above log from that failure/success

Thanks again Colby for all your efforts that you have put into these awesome tools and I hope that this information helps in some way. Please let me know If I can better explain any of this, or if you need any other logs.

Josh
Josh Long
 
Posts: 2
Joined: Sat Jun 16, 2007 8:43 am
Top
Post a reply

Return to General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 5 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Time : 0.131s | 14 Queries | GZIP : Off