Evoscan/Mitsulogger on Evo V and VI

[cossie1]

yhpm

[evoIT]

would this have any affect for obd2 emissions testings. im tryin to enable my mirage 99(evo 4 swapped & ecu) to use obd2 diagnostic to test emission. went to the emissions test. the man tried connecting to the obd2 but it didnt log. the real question is i know it wont pass emissions but it doesnt even log to test. just keeps running like its trying to connect. now should i try the 1 to 4 connection to see if itll log to test emissions?

my mirage obd2 connections are:

1- light green
4- ground
5- ground
7- orange
9- light blue
12-yellow
16- red w/ black stripe

does pins 9,12 apply to the obd2 testing? how do i change the braud rate to read, test for emissions? this is not for tuning purposes only to test my obd2 for emissions.

[Jon [in CT]]

If you also swapped the EVO4 ECU, you're hosed, because I don't think it's OBD-II compliant, which is required in the US for all ECUs 1996 and newer.

[letsteyr]

any one tryed with evoscan 2.6 to reflash an evo V/VI ?

[todd-w]

evoscan is a logging diagnostic tool ,if you fit a 7 ecu you can use ecuflash to map it ,,only requires a few ecu pin changes use 90550001ra rom and make a few changes in ecu periphery .