Finally got around to getting my openport from tactrix-tried to read my ecu-connected the green connectors-ecu went into diag mode,but when i try to read the ecu with ECUflashi keep getting a kernel get version error
Is there somthing simple that i havnt done, or do i need some more technical advice(newbee alert)
heres what i get on the task info screen......
[00:09:57.593] Version 1.28.716
[00:09:57.593] 8 memory models read.
[00:09:58.515] 71 ROM metadata models read.
[00:09:58.515] checksum module "subarudbw" loaded.
[00:09:58.515] flashing tool "wrx02" loaded.
[00:09:58.515] flashing tool "wrx04" loaded.
[00:09:58.515] flashing tool "sti04" loaded.
[00:09:58.515] flashing tool "sti05" loaded.
[00:09:58.515] flashing tool "mitsukernel" loaded.
[00:09:58.515] flashing tool "mitsukernelocp" loaded.
[00:09:58.515] flashing tool "mitsubootloader" loaded.
[00:10:14.921] denso02_bootloader_cmd_start
[00:10:16.140] denso02_bootloader_cmd_start
[00:10:17.375] denso02_bootloader_cmd_start
[00:10:18.593] denso02_bootloader_cmd_start
[00:10:19.828] denso02_bootloader_cmd_start
[00:10:20.250] kernel get version
any help muchly appreciated.
Gary